| |
WMS 1450
The unit pictured below is set up in a modular,
wall-mounted configuration. The WMS Series is also available in a
variety of container or frame configurations.
Standard Features
Include:
316ss Direct-Drive High-Pressure Pump
316ss High-Pressure Plumbing
PLC Micro³ Marine Control Unit
LED Salinity Monitor & Auto Diverter
High and Low Pressure Safety Shut-Offs
Fresh Water Rinse & Clean Feature
Prefiltration: 30 & 5 Micron
Precision Flow Meters and Pressure Guages
Non-Corrosive Feed Pump
Product Water Sample Port
Multi-Tank Control
High-Efficiency TEFC Motors
Noise and Vibration Reducing Footings
All Necessary Installation Hardware
Optional Features:
Automatic Start/Stop/Rinse with Manual Override
Unattended Rinse
Remote Operation
Pre-Mounting to High Density Plastic Panel
High-Efficiency Bag Prefiltration
Remote Warning Indicators
Media Filtration - Back Washable
Ozone or UV Treatment
Chemical Injection Systems
Alternate Power Configurations
Alternate Physical Configurations
(Modular/Frame/Container)
Cleaning/Spare Parts Kit Includes Cleaning
Tank, Pump and Hoses |
 |
|
|
|
Physical
Specifications |
|
| Component |
Length
|
Depth |
Height |
Weight** |
| H.P. Pump/Motor |
28.5 |
12.0" |
11.3" |
152.0 lbs |
Prefilters
(including frame and piping) |
18.5" |
8.3" |
13.3" |
16.0 lbs |
Charcoal Rinse Filter
(including piping) |
17.5" |
8.3" |
28.8" |
17.0 lbs |
| Electric Panel |
9.3" |
6.0" |
12.5" |
9.0 lbs |
| Valve Panel |
28.0" |
6.0" |
11.0" |
11.0 lbs |
Membrane
Assembly
(including piping) |
53.5" |
3.8" |
16.3" |
57.0 lbs |
Feed Pump
(including fittings) |
16.4" |
8.8" |
11.1" |
25.0 lbs |
| Flow Panel |
11.3" |
8.0" |
15.0" |
10.0 lbs |
| Contactor Box* |
9.3" |
5.1" |
12.5" |
14.0 lbs |
| Install Kit, Hoses &
Cleaning Pump/Tank* |
N/A |
N/A |
N/A |
34.0 lbs |
*not pictured
**approximate |
Total Weight**: |
345.0 lbs |
|
Operating Specifications |
| |
Year 1 |
Year 2 |
| Capacity* |
(GPD) |
1628.0 |
1567.0 |
| |
(GPH) |
67.8 |
65.3 |
| |
(LPH) |
256.8 |
247.2 |
| Horsepower |
H.P. Pump |
5.0 |
5.0 |
| |
Feed Pump |
.75 |
.75 |
| |
H.P. Pump Flow |
6.0 |
6.0 |
| Power Specifications |
| |
Option 1 |
20.7 amps @
208V, 60 Hz, 3-phase, 4.3 kwh |
| |
Option 2 |
34.9 amps @
230V, 60 Hz, 1-phase, 8.0 kwh |
*Standard Test
Conditions:
Pressure: 900 PSI
Source Water: Salinity 35,000 ppm, pH 7, temp. 77F/25C
Product Flow: +/- 15% at standard conditions
I would like to
express my thanks for the installation of your reverse osmosis plant in
the Yacht Blackhawk. With other RO plants in the past, we have had
nothing but problems. This caused many hardships, especially in the
Bahamas where there is a serious shortage of potable water. However,
After 1000 hours of use, our Watermakers Inc watermaker has not failed
to produce over 1500 gallons of water per day. Many thanks for your
excellent product and services.
| - Mr. William Wirtz, M/Y BLACKHAWK |
 |
|
|
